MC Spray

Metallic Spray for Galvanized materials

Perfect color matching metallic spray for galvanized materials

MC spray, which is ideal for color matching after hot-dip galvanization and for hiding blemishes or ROVAL repairs.

Difference from Normal silver paint

Sometimes see the use of Normal silver paint for hiding blemishes on galvanized surfaces.
At first, the galvanized surfaces is also shiny, so it is matching. However, when the luster is lost over time, the silver part stands out.
MC is designed to lose its luster over time, just like galvanizing, and at the end MC film disappears, so the repaired part will not stand out forever.

The photo below shows a plate with MC and Normal silver paint coating on the upper half of a galvanized plate.

MCColor is matching!

Good!
Before exposure
Good!
After 3 months

Normal silver paint – Color mismatched!

Good!
Before exposure
Bad!
After 3 months

Gray coating touch-up

Before painting
After painting

Topcoat for ROVAL

Repair with ROVAL
Apply MC for color matching

Tips

No anti-corrosion effect.

Spray MC after applying ROVAL on cut surfaces, welds, and non-plated areas for maximum protection.

Weathering is slowed by excessively thick film.
Exposure conditions will affect the weathering rate.

Line up & specification

Recommended film thickness10μm (1 coat)
Dry to touch time15 – 30 minutes
Heat resistance90C˚
Aerosol 420ml
(NET WT 302g)

Painting area: 3m2
Packaging: 24 cans / case

< Home >