ROVAL SILVER

Silver Zinc Rich Compound

Suitable for repairing old galvanizing surfaces or as a top coat for ROVAL Cold Galvanizing.

ROVAL SILVER is the designer’s choice because of the silver hue.
83% zinc in its dry film maintains high anti-corrosion performance compared with other normal paints. Suitable for repairing old galvanized materials or as a top-coat for ROVAL Cold Galvanizing.

>> View Gallery

Finishes in a color similar to hot-dip galvanizing.

Pipes
Railway Noise barrier

Easy-to-handle, single liquid type compound & Aerosol

Spraying ROVAL SILVER

Use ROVAL as primer for better anti-corrosion performance.

To achieve best anti-rust effect, ROVAL (R) is highly recommended to be used as primer when using ROVAL SILVER (RS) to do anti-corrosion pretreatment of steel, large-area coating or in severe corrosive environment.
If applying ROVAL SILVER alone without primer, the thickness of the coating film must be larger than 80μm.



1st Apply ROVAL
2nd Apply ROVAL SILVER

Color weathering of ROVAL SILVER

The film of ROVAL SILVER weathers the same as galvanized materials by exposure.
This characteristics makes repaired unapparent.
The photo below shows a plate with ROVAL SILVER coating on the upper half of a galvanized plate.

Before exposureAfter 3 months

Line up & specification

Recommended film thickness80μm (40μm x 2 coats)
Theoretical coverage500g/m2 (250g x 2 coats)
Dry to touch time30 – 60 minutes
Heat resistance170C˚
Aerosol 420ml
(NET WT 386g)

Painting area: 0.4m2 (2 coats)
Packaging: 24 cans / case
1.5kg/can

Painting area: 3m2 (2 coats)

Packaging: 4 cans / case
7kg/can

Painting area: 14m2 (2 coats)

Packaging: 1 can
20kg/can

Painting area: 40m2 (2 coats)
Packaging: 1 Pail
ROVAL THINNER

0.8kg

Packaging: 4 cans / case

14kg

Packaging: 1 Pail

< Home >